Tim Hance of All Islands Home Inspections shows a range oven missing its anti-tip bracket. These brackets come standard with all ranges, but are rarely installed. It’s a simple installation- the bracket simply screws into the floor and the oven leg “seats” into the bracket when pushed into place- and highly recommended for safety reasons. If a child steps on the open oven door, or if you have a large dish (turkey?), the oven could tip over. This has happened in the past, with fatal consequences, hence the anti-tip bracket is important to be installed. Thanks for watching and listening!
See more videos on our YouTube channel!
Anti-tip brackets are metal devices designed to prevent freestanding ranges from tipping. They are normally attached to one of the rear legs of the range or screwed into the wall behind the range, and are included in all installation kits. A unit that is not equipped with these devices may tip over if enough weight is applied to its open door, such as that from a large Thanksgiving turkey, or even a small child. A falling range can crush, scald, or burn anyone caught beneath.
According to the U.S. Consumer Product Safety Commission (CPSC), there were 143 incidents caused by range tip-overs from 1980 to 2006. Of the 33 incidents that resulted in death, most of those victims were children. A small child may stand on an open range door in order to see what is cooking on the stovetop and accidentally cause the entire unit to fall on top of him, along with whatever hot items may have been cooking on the stovetop. The elderly, too, may be injured while using the range for support while cleaning.
In response to this danger, the American National Standards Institute (ANSI) and Underwriters Laboratories (UL) created standards in 1991 that require all ranges manufactured after that year to be capable of remaining stable while supporting 250 pounds of weight on their open doors. Manufacturers’ instructions, too, require that anti-tip brackets provided be installed.
Check Your Range
It may be possible to see a wall-mounted bracket by looking over the rear of the range. Floor-mounted brackets are often hidden, although in some models with removable drawers, such as 30-inch electric ranges made by General Electric, the drawers can be removed and a flashlight can be used to search for the bracket.
A more certain test is trying to carefully tip the range. The range should be turned off, and all items should be removed from the stovetop first. Then, firmly grip the upper-rear section of the range and tip the unit. If it’s equipped with an anti-tip bracket, the unit will not tip more than several inches before coming to a halt. It is usually easier to detect a bracket by tipping the range than through a visual search. This test can be performed on all models and it can confirm the functionality of a bracket.